Installing shutters isn’t a hard process at all. The key is to work with shutters that have been specifically built for each individual window opening in conjunction with detailed instructions.

Many companies that install shutters will tell customers that the shutters need to be fitted by a certified installer. This isn’t the case, as you can install your shutters like a pro with no previous knowledge.

To properly install shutters to a window opening, you’ll need to measure. First, you’ll need to determine if the shutters will be mounted to the inside or the outside of the window opening.

The preferred method of installation is to mount shutters directly to the window jamb inside of the window opening. This method is usually neater than mounting to the outside of the window and it doesn’t need additional hang strips or frame strips. Bear in mind, the window must be somewhat square and have a solid jamb for you to attach the screws to.

To determine the window depth, measure from the front plane of the window back to the nearest obstruction that’ll obstruct the louvers from rotating. If you prefer, the company you are ordering from can also tell you the window depth for the style of shutters you order.

Sometimes, a supplier of shutters will offer a second inside mounting method that uses rear hanging strips hidden behind the shutter panels that will allow adjustment up, down, left, and right for easier alignment. This method is ideal if the window is not square or if it has a drywall opening without a solid wood jamb.

Outside mount installations use frames that attach to the wall or existing trim just to the outside of the opening of the window. Usually, the frame will surround the shutter panels on three or four sides, depending on if a lower still exists.

If you go with a cafe type shutter style, the hang strips are used on either side of the shutter panels. The frame or hang strips will screw directly to the wall or trim, and the shutter hinge to the frame or the hanging strips.

It’s best to measure with a steel tape measure, which will give you the most accurate measurements. Don’t attempt to measure with a fabric tape or yard stick - as this will lead to a poor installation.

These days many home owners are feeling the pinch – so many household costs have risen. It makes sense to tackle many home improvements tasks yourself. Tiling, if done well can add value to your home, as well as being practical. And with the right instruction it is not as difficult as you might think.
Learn more:
How to grout tile
How to grout tile
how to tile floors

Bookmark to: